The corn selection machine is suitable for the selection of a variety of grains (such as: wheat, corn/maize, rice, barley, beans, sorghum and vegetable seeds, etc.), and can remove moldy and rotten grains, insect-eaten grains, smut grains, and corn grains. Kernels, sprouted grains, and these grains with chaff, and light impurities are removed. After the seeds are selected, their thousand-grain weight, germination rate, clarity, and uniformity will be significantly improved. If the grains go through preliminary selection and grading before selection, the selection machine will get better sorting effect.
The machine uses airflow and vibration friction to produce the principle of specific gravity segregation under the double action of the material. By adjusting its wind pressure, amplitude and other technical parameters, the material with relatively large specific gravity will settle to the bottom layer and stick to it. The sieve moves to a higher place, and the materials with relatively small specific gravity are suspended on the surface of the material layer and flow to a lower place to achieve the effect of specific gravity separation. At the same time, the upper part of the vibrating table of this model is designed with a stone removal angle, which can separate the stones from the material. The frame of the corn selection machine is made of high-quality steel plate with anti-rust treatment, which is durable and prolongs the service life. The feeding hopper is located at the bottom of the machine, and it is more convenient to add materials with the hoist; the baffles of the feeding port and the discharging port are easy to operate. The whole machine has the characteristics of simple structure, flexible operation, low power consumption, stable operation, and strong applicability. Users can choose to replace the sieve and specific gravity sieve to screen different materials, so as to achieve simple classification and realize one machine with multiple functions.
1. Refuel the lubrication points before each operation;
2. Before operation, check whether the connecting screws of each part are fastened, whether the rotation of the transmission parts is flexible, whether there is any abnormal sound, and whether the tension of the transmission belt is appropriate;
3. It is best for the selection machine to work indoors. The machine should be parked in a flat and solid place, and the parking position should be convenient for dust removal;
4. When changing varieties in the operation process, be sure to clean up the remaining seeds in the machine, and keep the machine running for 5-10 minutes, and at the same time, switch the front and rear air volume adjustment handles several times to eliminate the seeds deposited in the front, middle and rear. Indoor residual species and impurities;
5. If restricted by conditions and must be operated outdoors, the machine should be parked in a sheltered place and placed along the wind to reduce the influence of wind on the selection effect;
6. Cleaning and inspection should be carried out after the end, and faults should be eliminated in time.
Post time: Feb-14-2023
