The seed compound cleaning machine mainly relies on the vertical air screen to complete the sorting function. According to the aerodynamic characteristics of the seeds, corresponding to the critical speed of the seeds and the difference between pollutants, it can adjust the air flow rate to achieve the purpose of separation, which is relatively Light pollutants are sucked into the chamber and discharged, and seeds with better mesh pass through the air screen and enter the top of the vibrating screen. The middle and bottom three-layer screens are vibrated and equipped with four kinds of openings. Large impurities, small impurities and selected seeds can be distributed separately (can also be used in three-layer, four-layer and multi-layer screening boxes, cleaning and sorting can be carried out in one step through vibrating screening) according to the geometric characteristics of seed size , there are different types and varieties of seeds, and different sizes. Choosing to change different screen sizes can meet the needs of classification.
Let’s learn about the aspects to consider when using a seed cleaning machine:
1. Please read the operating instructions carefully before starting work.
2. Before starting, please check whether the connecting parts of the machine are loose and remove them.
3. Before starting work, the electrician should check the condition of each electrical appliance. At the same time, during operation, the grounding cable should be well grounded at the mark on the machine.
4. Turn on the power, then press the start switch to check whether the machine’s steering meets the requirements.
5. If the machine fails, it should be shut down immediately for repair. It is strictly prohibited to repair errors during operation. When the hoist is working, it is strictly prohibited to extend it into the feed bucket, and it is strictly prohibited for people and children with abnormal behavior to use it.
6. Sudden power outage during operation. The power supply must be interrupted in time to avoid accidents caused by sudden start of the machine.
7. This machine is driven by an electric motor and has many V-belts. It must be smooth and safe during use.
8. Follow the operating procedures and correct them immediately if problems are found. It is strictly prohibited to open the belt guard to start the machine to avoid accidents.
9. During transportation, the machine rotates the four screws to the high point of the Z axis, the wheels are on the ground, and the working area should be flat.
10. First check whether all parts of the machine are normal, then turn on the switch to check whether the steering of each device is correct. Insert the grain into the hopper of the elevator and then lift it through the elevator. Impurities with irregular shapes that enter the hopper and enter the classification are discharged by various material collectors and discharged into the discharge box.
Post time: Sep-12-2023
