The compound concentrator has wide adaptability, and can select seeds such as wheat, rice, corn, sorghum, beans, rapeseed, forage and green manure by changing the sieve and adjusting the air volume.
The machine has high requirements for use and maintenance, and a slight negligence will affect the selection quality. The main points of use and maintenance of the machine are briefly introduced as follows!
1. The selection machine works indoors, the machine should be parked in a flat and solid place, and the parking place should be convenient for dust removal.
2. If the conditions are limited, it is necessary to work outdoors, and the machine should be parked in a sheltered place, and the machine should be placed along the wind to reduce the impact of wind on the selection effect. When the wind speed is greater than grade 3, wind barriers should be considered.
3. When changing varieties, be sure to clean up the remaining seed grains in the machine, and keep the machine running for 5-10 minutes. At the same time, switch the front and rear volume adjustment handles several times to eliminate the remaining seeds in the front, middle, back and deposition chambers. Seeds and impurities After confirming that there are no seeds and impurities flowing out from several storage chambers, the machine can be stopped, and the seeds and impurities on the upper sieve surface are cleaned to the miscellaneous discharge tank, then the upper sieve surface is removed, and the lower sieve is cleaned. . 4. Before each operation, check whether the fastening screws of each part are loose, whether the rotation is flexible, whether there is any abnormal sound, and whether the tension of the transmission belt is appropriate.
5. Add oil to the lubrication point.
6. After each operation, cleaning and inspection should be carried out, and faults should be eliminated in time.
Post time: Sep-07-2023
